December 30, 1999
What is the best way to tell a 351M crank from a 400M crank when placed side by side,Thanks.Forums : Engines : 351M-400M crankshaft (1607 Views)
 |
 |
1 |  |
 |
December 31, 1999
The best way would be to use the casting #`s.The 351M crank is actually a 351W crank. Look for the 351`s 1/2" shorter stroke in the rod journals.
December 31, 1999
The snout on the 351M is apparently different from the 351W. That`s why a 4" stroke Windsor is no easy task without some fancy machining. I think it was Coast High-Performance that had that info - can`t quite remember.As BroncoJ says, measure the crank.
August 15, 2011
i am wondering what the benefits are of a aftermarket crankshaft kit? after that, what is the best crankshaft kit?...November 14, 2011
I have a 1996 Chevrolet Silverado Z71 with a 350 Vortec engine. I am replacing the truck parts engine with a rebuilt 350 that is a few years older and does not have the crankshaft sensor. What do i need to do to bypass this crankshaft sensor? |
|
1 | |
|
