September 28, 2001Stroke it and then supercharge it. You will then have plenty of low end torque. A combo set up properly will deliver over 500 hp and over 600 ftlbs of torque.
September 29, 2001i agree with most of what has been suggested but buy factory stuff where u can but for torque at low rpm a performer intake manifold ( buy a decent brand )is second to none 450 475 hp wasnt hard or expensive in Australia
September 29, 2001i have been building a motor for my 75 elcamino(almost done). i have a set of trick flow pistons, rods, and heads that match each other and a good size cam cant remember what the specs where on it. The motor is puting out about 12:1 compresion. me and my neghbor figured out that i could make about 400 to 450 out of my setup. it is an all roller motor. roller cam rocker arms ported oil drains for better flow. remember little things help.
September 30, 2001Car Craft did a write up on how to get 650 H.P.(?) i think out of a 350. i`ll have to look for it i know i have it somewhere. i`ll get back to you