January 13, 2003Does this Sound as if it would work.
Can the rear preout from my Head Unit give my external Digital 5.1 processor a signal so I can use the Front preout of HU to bypass the pprocessor straight to 2 EQTS
SO Basically I would Run HU Front Pre-out to my 4 channel 80x4 Amp thatâ€™s running the set of -6.5â€ťs in KP, bridged 2ohm Front Staging. Or I could also keep rear 6â€ť coax speakers hooked up for some rear fills ...for all four speaker placements but no fadingâ€¦just turn gains down for rear speakers
Run HU *Rear* Pre-out to the *input* of the digital 5.1 dolby processor (PXA) to get it the Signalâ€¦..if possible.
The sub pre-out on HU is empty
The front Pre-out is bypassing the PXA straight to 2- EQTS and the rear HU pre-out is giving the PXA the Signalâ€¦
Then Run the *PXA processors* Front output to 2 channel 75x2 amp for the front mid-bass front imagingâ€¦..8â€ť
Then Run *PXA processors* Rear output to 30x4 for rear fill or surroundâ€¦channels 3,4 are
y adapted for the Sub/Center Output off PXA to the 30x4 and run Bridged 1,2 center to be 70x2 6.5 single in the center armrest
Run the sub one (right, RED) with y adapter and run monoâ€¦since the sub/cc off PXA splits MONO left CC right SUB
Front HU pre-out to EQTsâ€¦.to 4 channel amp bridged for Imaging speakers in Kickpanels
Run front output of PXA to 2 channel amp for the 8â€ť speakers in Doors
Run the REAR output of PXA to the 30x4 channel 1,2 ..channel amp to get some mid-bass for 10â€™s in rear Lower gain Bridge the 1,2 channel to single RIGHT channel off 30x4 amp
CENTER /SUB output PXA to go to 3,4 channel of the 30x4 but run Bridged it monoâ€¦(LEFT black RCA)
Subs to 300x2 but y adapter to run them MONO (right RED RCA)
Rear mid-bass 10â€™s off 1,2 of 30x4 rear output PXA get gains lower than front area staging
Center ch. front mono bridged 3,4 off 30x4 (left channel black rca) sub/cc output PXA y adater one goes to the subs amp RED RIGHTCH> POS..the other goes to CC AMP LEFT BLACK neg.
Front output PXA for mid-bass front off 75x2
Subs mono 300x2 but right channel red for mono off y adapter from sub CC pxa