November 22, 2006I have a 1993 Jeep Wrangler with a 2.5 high output engine and the wiring harness under the hood brunt --- the junction box. My wiring harness is a 3 piece system and I have replaced the wiring going to the fuel tank from the computer and the juction box wiring harness. Well this is the problem. When I press the brake pedel the engine cranks and starts. It will not crank with the ign. switch key. I have replaced the ign. switch, turn signal switch and I have traced all the wirng under the dash and have found nothing wrong... Cna anybody help me. please e-mail me at firstname.lastname@example.org 1993 Jeep wrangler 2.5 5 speed trans no a/c and rolled out of the assembly line in 1992 in Aug.
Forums : General Tech Questions : Wiring Wows (330 Views)
Subscribers : Phillip Fraire